Ares – Wall Mounted

admin

Martina

Description:

• Outdoor round spotlight.
• Configuration: Turned and anodized or painted aluminium structure with stainless steel adjustable bracket.
• Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Tempered transparent or sandblasted glass with silkscreen border, nitrile rubber gaskets. • Glass fixed to the structure through a robotic gluing system.
• Protection rating: IP67.
• In compliance with EN 60598-1 standards.
• Class of insulation: III.
• Martina and MaxiMartina 24V are equipped with a dc/dc highly efficient resin-coated converter that removes electromagnetic interference and allows parallel wiring. Martina and MaxiMartina 24V are protected against polarity reversal and sudden voltage peak.
• Installation requires a SELV equivalent remote power supply.
• MiniMartina, Martina RGB and Maxi Martina RGB: connection in series. Martina and MaxiMartina: connection in parallel.
• Installation: the luminaire is equipped with 2 meters neoprene cable fixed to a cable gland placed inside the luminaire.

SIMES – Wall Mounted

admin

S.6425N - MINISHAPE

MATERIAL CHARACTERISTICS:

Aluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process
1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Improved protection for Marine applications. Mechanical resistance of diffuser IK 10

S.6420W - SHAPE

MATERIAL CHARACTERISTICS:

Aluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process
1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Improved protection for Marine applications. Mechanical resistance of diffuser IK 10

S.6965W - ZEN SQUARE WITH GRILL

MATERIAL CHARACTERISTICS:

Aluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. EPDM gaskets. Painting Process : 3 Step Process
1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Improved protection for Marine applications. Mechanical resistance of diffuser IK 06 (IK 09 on request only for ROUND VERSION)

BEGA – Wall Mounted

admin

Pillar luminaire - 44 237

Description:

Luminaire made of aluminium alloy, aluminium and stainless steel
White synthetic sphere
Mounting plate with 3 xing holes ø 8.5 mm Angle 120° · Pitch circle ø 100 mm
Mounting bracket with 2-pole terminal block [email protected] and earth conductor terminal for connection of mains supply cable max. 3 × [email protected]
Lampholder G 24 d-3
Ballast (EEI=A3)
230 V y 50 Hz
Safety class I
Protection class IP 44
Protected against granular foreign bodies > 1 mm and splash water
Impact strength IK06 Protection against mechanical impacts < 1 joule
r – Safety mark
c – Conformity mark Weight: 8.6 kg

Ceiling and wall luminaire - IP 65 - 3522

Description:

Luminaire cover made of stainless steel Steel grade number 1.4401
Luminiare base made of aluminium alloy Crystal glass with optical structure Silicone gasket
2 xing holes ø 5.5 mm with
270 mm spacing
2 cable entries for through-wiring of mains supply cable up to ø 10.5 mm
max. 3 x [email protected]
Connecting terminal and
earth conductor terminal [email protected]
Lampholder GX 24 d-3
Ballast 230 V y 50 Hz
Prepared for PF correction capacitor Safety class I
Protection class IP 65
Dust tight and protection against water jets r – Safety mark
c – Conformity mark
Weight: 6.4 kg

Wall luminaire - IP 65 - 2985

Description:

Shielded wall luminiaire with high protection class for a variety of lighting tasks.
A luminaire made of die cast aluminium and impact resistant crystal glass with light diffusing structures.
For interior and exterior lighting applications.

Trilux – Floods & Wall Mounted

admin

Skeo Pura 26-RB8L/500-830 1G1P ET

Luminaire Type:

Wall surface-mounted LED luminaire for outdoor areas.

Application:

For decorative, accentuating lighting solutions in outdoor areas, for building access areas, facades.

Mounting Method:

Mounting of wall luminaire with cast aluminium mounting plate.

Optical System:

Optical system consists of 1 LED module, cover of 4 mm-thick hardened glass, white.

Electrical Version:

With electronic transformer, switchable.

Lumena 40-RB3L/2200-740 4G1S ET

Luminaire Type:

LED floodlight for illumination

Application:

Pedestrian zones, Arcades, Passages, Light around the house, Car parks, Works roads, Harbour facilities, Shipping facilities, Storage locations, Container areas, Golf courses, Cross country ski courses, Accent lighting.

Mounting Method:

Fixing bracket of aluminium for mounting to horizontal surfaces, ceilings and posts with use of accessories.

Optical System:

Optical system of high quality UV and temperature- resistant optical lens systems. With rotationally symmetrical wide angle light distribution.

Electrical Version:

With electronic transformer, switchable. Surge voltage resistance 4 kV.

Combial SM/1x400HIT K TW nw

Luminaire Type:

Wide-area projector with symmetric light distribution. For 1 HIT metal halide lamp 400 W.

Application:

Building sites, Harbour facilities, Shipping facilities, Storage locations, Container areas, Power stations, Accent lighting..

Mounting Method:

Pivotable fixing bracket for suspended and vertical mounting.

Optical System:

Aluminium reflector with reflection-intensifying coated surface. With symmetric wide light intensity distribution.

Electrical Version:

With inductive ballast, parallel-compensated.

HEAD OFFICE

Nablus - Gharnata St.

P.O.Box: 123

Tel: +970 9 2371636

Fax: +970 9 2374506

Email: [email protected]

© 2018 Bluebell Advertising Agency